014-1059-030 - Follower plate for pumps with shank 30 mm subgroup-Accessoires en losse onderdelen-Vet oplossingen The operating pressure of the

The operating pressure of the pumps may vary between a minimum of 3 bar and a maximum of 8 bar

5 bar and a maximum of 8 bar

dispensers and manual pumps where a major quantity of grease with slow pressure and short distance is required

Maximale werk "druk" 500 bar

Suitable for high pressure transfer of high viscosity grease and fluids over short and long distances and for central distribution plants with multiple dispensing points

014-1059-030 - Follower plate for pumps with shank 30 mm subgroup-Accessoires en losse onderdelen-Vet oplossingen The operating pressure of theIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.